1. <bdo id="zcaqx"></bdo>
        <menuitem id="zcaqx"><dfn id="zcaqx"><menu id="zcaqx"></menu></dfn></menuitem>
          <tbody id="zcaqx"></tbody>
          <bdo id="zcaqx"><optgroup id="zcaqx"></optgroup></bdo><track id="zcaqx"></track>
          <track id="zcaqx"></track>
        1. Welcome to SICHUAN SAIER VALVE MFG. CO., LTD.
          4
          CONTACT US
          Tel:+86-813-5502212
          Fax:+86-813-5502209
          E-mail:sevvalve@163.com
              sev-grace@163.com
              sevmaggie@sina.com
          Skype:sev-grace 
             maggie1123
          Globe valve
          2014.12.30 / VIEW:1767

          Globe Valve Manufacturing Specifications

           Content  Specification
           General design standard  BS 1873 or refer to API 600
           Pressure-temperature rating  ASME B16.34
           Face to face dimensions  ASME B16.10
           Flange type and dimensions  ASME B16.5
           Butt-welded end  ASME B16.25
           Inspection and test  API598

          ● Constriction
          SEV globe valve adopt OS&Y. B.B. Rotary Rising Stem and Handwheel, which is in accordance with international general standard.
          ● Body and Bonnet
          After being strictly calculated, the design of the body and bonnet possess good
          performance of strength, rigidity, perfect seal and flowing ability. It makes more
          reliable for the seal of the packing and more convenient for the replacement of the
          packing to have assembled backseat onto the bonnet.
          ● Seat and Disc
          The flat or cone sealing is used for the connection between the seat and disc.
          For SEV globe valve in different pressure or specifications, the seat would have the
          following types:
            The connection of the seat and the body may either be threaded or welded type.
            The threaded type seat is easy for disassemble, maintenance and replacement.
            The seating surface is directly welded on the body.
          For stainless steel gate valve, the sealing surface is machined and finished on
          the body.

          ● Stem and Yoke Sleeve
          The thread coordination of the stem and yoke sleeve adopts appropriate fit clearance and special thread remedy to ensure flexibility of the valve’s actuation and the valve’s self-locking ability. The contact part of the disc and stem is inserted with a piece of hard stainless steel material, so that this part will not deformed by pressing, nor be rusty to effect flexibility of the disc’s operation.
          ● Packing and Lantern Ring
          The dimension and quantity of the packing conform to the standard to ensure the reliability of sealing. Packing materialsare made of graphite (free of asbestos). The lantern ring may be supplied if the customers require.
          ● Gasket
          Connection between body and bonnet shall be Bolted Flange. Gasket of Flange

          shall be as follows:

          Class 150

          Flat Gasket

          Class 300

          Female or Male Gasket

          Class 600&larger

          Octagon Ring Gasket

          The metal spiral wound gasket with inner ring and filling with graphite makes more reliable for the seal of the gasket and excellent capability of disassembling and reassembling.

          Print】 【Collect】 【Close